News20 Sep 2019
Due to a corporate event, we will be out of office from 13 o'clock (CET). Please feel free to leave a message on the answering machine, via e-mail or our contact form.13 Sep 2019
SEPA-Transfer v10.2.7 - Compatibility with the new Postbank Online Banking established12 Aug 2019
SmartCallMonitor Free v3.1.1 - resolves issues with Outlook and Fritz!Box monitoring.12 Aug 2019
SmartCallMonitor v3.1.1 - resolves issues with Outlook and Fritz!Box monitoring.12 Aug 2019
TreeSize v7.1.2 - with some minor improvements and bugfixes has been released.
In the upper part of the main window, all configured sensors are displayed.
Below you can find the collected data in the form of a list or graphical chart.
The chart view visualizes the collected data of a sensor (here in 3D).
Entries marked in red signify that the sensor has tracked a failure. Orange markers denote that the sensor is in a "critical state" (in this case, the response time of the sensor exceeded 150 ms).
ServerSentinel also provides a detailed view of the collected data of a sensor, where the raw data is presented in table form. The classification is identical: Orange = critical state, red = failure tracked.
ServerSentinel offers a range of predefined sensors that can be selected in the main menu.
The sensors can be configured individually:
On the left side you can define general information of each sensor (e.g. name & check interval) as well as specific values (in this case the URL that is to be checked by the HTTP sensor). Furthermore, you can set conditions and related actions on the right site.
You can define any action that is to be carried out by ServerSentinel if certain conditions apply, e.g. notifications via SMS text message or email or the execution of a script. A wizard leads you through the configuration.